Based on the recent update 23. I am starting to plan and ready the site for the placement of the Sky. I don’t want site issues to dog me once the long wait is over.
I have a good location planned, away from buildings and trees, no obstructions for wind and sun. I am planning on using a stick of 1-inch rigid conduit as the ‘tower’, set in the ground inside another conduit to facilitate the changing of batteries without using ladders. I estimate about a 7 or 8-foot ground clearance with the setup. My concern is the possible vibration and oscillation of the stick of conduit in the wind. If necessary, I can shim the base into the ground receiver to eliminate any oscillation from the mounting base.
Am I overthinking the influence of the ‘tower’ vibration and oscillation on the Sky’s measurements?