I have read through all the post relating to shields for the Air, be it DIY or using the ambient srs100lx off the shelf shield, however I have come across two glaring siting issues.
1 The air is meant to be portable or fixed but in some climes finding suitable shaded area that allows the Air to work efficiently and be permanently sited outdoors is likely to be difficult. A user is unlikely to keep going outside to move it. It defeats the purpose especially in stormy conditions. It could be kept indoors but that again defeats the reason for the Air. A permanent position must be the answer; therefore it would appear to me that a shield should be a defacto option from Weatherflow. Is there one in the pipeline? If so when would it be available?
2 In your FAQ you mention that you have housed the Air in the SRS100lx unit and this is widely available. Unfortunately it is not available in Europe and so another source is required. I cannot find any mention of the exterior dimensions of the Air on the site and this would be most helpful in allowing users to source a suitable shield, or indeed make a DIY unit. Can this be published please. I have the internal dimension form the SRS100lx but as my units have not arrived I cannot be sure that what I would be buying would be perfect. Most Shield sellers publish the OD and not the IDs so trying to buy the right ones is going to be interesting. Publishing the AIR dimensions would go a long way and would be most appreciated.
Please, please say you have shields on the way