Can't reconnect to wifi after router reboot

Hi all, my tempest had been working well untill I rebooted my router. Here’s what happens:

When trying to reconnect the wifi I first power cycle the hub.

The led turns red
I start the app
The led turns blue
Then settings, stations,choose my station, wifi setup, next, message “Scanning”, then after about 3 seconds the led turns red, then I get a message No wifi found.

Sometimes I get an error code 1006.

Here’s what I have done:

  1. Rebooted the hub.
  2. Reset the hub
  3. Confirmed my tablet was connected to a 2.4 ghz ssid

After resetting the hub it found my Tempest device by itself so I did not have to resync.

Rarely I have been able to reconnect to wifi, the led turns green, but the connection lasts, at best, a few hours. Mostly I have the problems mentioned above.

The hub and router are in the same room, about 8 feet away from each other. No other devices are losing connection on my network.

Any help would be very much appreciated.

3 posts were merged into an existing topic: Hub failing ? can’t get wifi to connect