Third-Party Integrations A place for users of third-party apps & integrations that make use of Smart Weather Station data to ask questions and share experiences. Please tag your post with the appropriate 3rd-party name, if known. Feature Requests Use this category for any requests for any “features” including additions to hardware, firmware, software, and accessories! Bug Reports For all bug reports, please list the app platform (web, android, iOS), version (e.g. 1.70(23)), your operating system (e.g., iOS 11.2) and hardware (e.g, Samsung Galaxy 7) and be as specific as possible. Included instructions for reproducing the issue, if appropriate. Thanks!
Topic Replies Activity
Photos of Air and Installation

A topic to share how we mounted the Air device. When you read a good post, press the :heart: icon.

180 February 1, 2020
Introducing RainCheck

At long last, we’re rolling out some significant updates to the way we report rain data from your SKY devices – starting with users in the Continental USA. The haptic rain sensor in the SKY is an incredible little device…

206 January 22, 2020
Station ID : How to find it and What it is (good for)

The Station ID is a unique identifier for an installed Hub. Hence, a complete Weatherflow SmartWeather installation including all installed Air and Sky modules can be accessed by this ID. In case of any issue specific t…

3 September 13, 2019
CL System for Pressure calibration explained

On October 12th we quietly launched our new Continuous Learning (CL) auto-calibration system for Pressure. The system performs a quality control inspection on the raw station pressure sensor data from your AIR, and appli…

39 April 16, 2019
Official Smart Weather Station HELP CENTER

Visit WeatherFlow’s Smart Weather Station help center for general information, troubleshooting guides, resources and customer support.

4 February 26, 2019
CL for Humidity explained

In late August 2018 we launched our new Continuous Learning (CL) auto-calibration system for Humidity. The system performs a quality control inspection and ensures that your humidity values are both unique to your locati…

5 May 7, 2019
CL system for UV explained

CL System for UV calibration explained During early October 2018, we quietly launched our new Continuous Learning (CL) auto-calibration system for UV. The system is designed to evaluate the raw UV sensor data from your …

13 January 22, 2020
Hardware physical dimensions

I took a couple minutes to measure the hardware since the question comes up so often… Air = 133 mm (5-1/4 in) high and 64 mm (2.5 in) in diameter Sky = 95 mm (3-3/4 in) in diameter at its widest point and 200 mm (8 in)…

3 August 21, 2018
Welcome Owners! 1 November 30, 2017
Two failed sky light sensors it seems 15 February 21, 2020
Preventive steps to keep large birds from damaging a new tempest? 12 February 21, 2020
Failing solar panel accessory (SPA) 244 February 20, 2020
Homekit integration 22 February 19, 2020
Air Battery stops reporting even though Air Temp is updating 3 February 16, 2020
Hub light always blue - is this an issue? 3 February 16, 2020
Spiking temperature when changing battery in AIR 3 February 15, 2020
Recharge restart for sky after freezing temps : solar panel (SPA) 47 February 14, 2020
Sky - solar panel - overcast days 119 February 14, 2020
Who does better? 7 February 12, 2020
Wellp, I busted my Sky... questions about Tempest 7 February 12, 2020
Rain check did not run on 9th 4 February 10, 2020
Rain values show gap and drop on Rain graph 7 February 10, 2020
Minimum air pressure 3 February 10, 2020
Wind error way too high 31 February 8, 2020
Raincheck Not Updating? 3 February 7, 2020
Hub failing ? can't get wifi to connect 21 February 7, 2020
Rain sensor and vibrations 168 February 6, 2020
Sky Station keeps going offline 6 February 4, 2020
HUB shows RED then NO l.e.d 3 February 4, 2020
Occasional false lightning strikes notifications 5 February 4, 2020