Owners
Bug Reports For all bug reports, please list the app platform (web, android, iOS), version (e.g. 1.70(23)), your operating system (e.g., iOS 11.2) and hardware (e.g, Samsung Galaxy 7) and be as specific as possible. Included instructions for reproducing the issue, if appropriate. Thanks! Third-Party Integrations A place for users of third-party apps & integrations that make use of Smart Weather Station data to ask questions and share experiences. Please tag your post with the appropriate 3rd-party name, if known. Feature Requests Use this category for any requests for any “features” including additions to hardware, firmware, software, and accessories!
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Photos of Tempest and Installation
A place for everyone to post photos of your Tempest and how you installed the unit. |
|
314 | 6228 | July 11, 2020 |
|
Photos of Air and Installation
A topic to share how we mounted the Air device. When you read a good post, press the :heart: icon. |
|
181 | 10110 | June 9, 2020 |
|
Tempest voltage level versus power save mode
The Tempest uses several power save modes and those states will be activated by following the rules as stated bellow. This is a change versus the Sky where you had one you can activate via the application manually. Powe… |
|
2 | 333 | June 7, 2020 |
|
SKY/Tempest vs. co-located rain gauge” reporting,
Hi folks. In an effort to bring a little structure to the process of collecting and acting on your “SKY/Tempest vs. co-located rain gauge” reporting, we’ve created two Google forms: use this one to Register your Co-loc… |
|
1 | 372 | July 30, 2019 |
|
Reset procedure for the hub's radio in case of lost or bad connection with Tempest/Sky/Air
In some rare cases a device seems not more connected to the Hub or with a not explainable low signal quality. Sometimes a reset of the radio in the Hub solves this. Don’t go do this every week :slight_smile: Do the fo… |
|
2 | 352 | May 21, 2020 |
|
CL system for UV explained
CL System for UV calibration explained During early October 2018, we quietly launched our new Continuous Learning (CL) auto-calibration system for UV. The system is designed to evaluate the raw UV sensor data from your … |
|
2 | 1116 | March 19, 2020 |
|
Introducing RainCheck
At long last, we’re rolling out some significant updates to the way we report rain data from your SKY devices – starting with users in the Continental USA. The haptic rain sensor in the SKY is an incredible little device… |
|
2 | 8225 | March 19, 2020 |
|
Station ID : How to find it and What it is (good for)
The Station ID is a unique identifier for an installed Hub. Hence, a complete Weatherflow SmartWeather installation including all installed Air and Sky modules can be accessed by this ID. In case of any issue specific t… |
|
1 | 1454 | September 13, 2019 |
|
CL System for Pressure calibration explained
On October 12th we quietly launched our new Continuous Learning (CL) auto-calibration system for Pressure. The system performs a quality control inspection on the raw station pressure sensor data from your AIR, and appli… |
|
39 | 1977 | April 16, 2019 |
|
Official Smart Weather Station HELP CENTER
Visit WeatherFlow’s Smart Weather Station help center for general information, troubleshooting guides, resources and customer support. |
|
4 | 645 | February 26, 2019 |
|
CL for Humidity explained
In late August 2018 we launched our new Continuous Learning (CL) auto-calibration system for Humidity. The system performs a quality control inspection and ensures that your humidity values are both unique to your locati… |
|
6 | 871 | May 26, 2020 |
|
Hardware physical dimensions
I took a couple minutes to measure the hardware since the question comes up so often… Air = 133 mm (5-1/4 in) high and 64 mm (2.5 in) in diameter Sky = 95 mm (3-3/4 in) in diameter at its widest point and 200 mm (8 in)… |
|
3 | 637 | August 21, 2018 |
| Welcome Owners! |
|
1 | 706 | November 30, 2017 |
| [App] User configurable colors fonts |
|
1 | 3 | July 12, 2020 |
| A dedicated display |
|
15 | 242 | July 12, 2020 |
| ArchiveSW - Display & Data Archive Storage |
|
1622 | 21608 | July 12, 2020 |
| Option of Only Using CoCoRAHS Manual Rain Gauge For Calibrations |
|
5 | 50 | July 12, 2020 |
| Tempest Not Charging |
|
79 | 748 | July 12, 2020 |
| Tempest lost connection? (Solved with reset) |
|
177 | 1729 | July 12, 2020 |
| LED Status on Front of Hub |
|
1 | 10 | July 12, 2020 |
| Last state changed |
|
1 | 13 | July 12, 2020 |
| WeatherFlow PiConsole |
|
1256 | 23184 | July 11, 2020 |
| [App] History rollups |
|
7 | 150 | July 11, 2020 |
| Station off line message |
|
4 | 60 | July 11, 2020 |
| Question regarding AIR placement and orientation |
|
4 | 162 | September 18, 2019 |
| Potential newbie |
|
7 | 147 | July 10, 2020 |
| iOS and iPadOS Shortcut for Tempest locations |
|
4 | 189 | July 10, 2020 |
| Lightning Sensor Status sometimes reports 'Failed' |
|
18 | 158 | July 10, 2020 |
| Accurite sun shield modification to fit Air |
|
12 | 447 | July 10, 2020 |
| Can't find clear button on Tempest |
|
3 | 71 | July 10, 2020 |